- Ürün Özellikleri
- Yorumlar (0)
- Teslimat Koşulları
- Tavsiye Et
-
Son 2 Adet için özel fiyattır. IOT, Wifi, Akıllı Ev projeleri gibi sistemlerde kullanılabilir.
- Integrated IPv4 TCP/IP stack with built-in network protocols
- Antenna range of about 70 meters in open space
- Minimal WiFi or RF expertise required
- Minimal software requirements for target MCU
- Designed for 3.3V systems
CC3000 click is an add-on board in mikroBUS form factor which carries a TI CC3000MOD WiFi module and a ceramic antenna. This board allows you to add WiFi functionality to your project without much WiFi or RF expertise. The CC3000 WiFi 802.11b/g module has an integrated TCP/IPv4 stack with built-in network protocols (ARP, ICMP, DHCP client and DNS client). This simplifies connection to local networks or the internet, while minimizing software requirements for your target board's MCU.
The CC3000 click board enables OFDM rates from 1 to 54 Mbps in the 2.4GHz ISM band. The integrated 5K EEPROM also spares your MCU's internal resources. The ceramic antenna has a maximum range of about
70 meters in open space.The board communicates with your target microcontroller via mikroBUS UART (MISO, MOSI, SCK, CS), AN and INT lines. It designed to use 3.3V power supply only.
An SMD jumper allows you to switch from the default Function Mode to a Test Mode. Two additional pads are provided on the board to use in Test Mode for connecting to the CC3000 radio test tool. It uses an RS232 serial interface (RX, TX) with 1.8V signal logic.
